CHARGER YPWR 12V/60A/3 BANKS

- YPower YPO12-60ST 12V/60A model. - Recommended battery bank (Ah) 500-700Ah, - CAN-BUS interface, - voltage from 90 to 265VAC single-phase automatic, - frequency from 47 to 65Hz automatic. - Input current consumption 230/115VAC 4,4/8,7A. - Recommended power for a generator 1050W. Power factor 1, efficiency 90% typical. - Removable input fuses T15A/250V 6,3x32 (F101). - Number of battery banks 3 (including one for the engine battery) : +BAT E, +BAT 1 et +BAT 2 (integrated Mosfet splitter). Each bank can be used individually and deliver the rated current. - Total rated current (+/-7%) / Rated power 60A/855W. - Charging curve IU or IUoU through internal dip switches (Boost, Absorption and Floating – factory setting) - Selectable automatic Refresh. - Battery type: Lead sealed as factory setting - Other choices through internal setting (Calcium Lead, gel, AGM, LiFePO4, Opened, etc.) - Boost voltage 14,4VDC for Lead sealed battery (factory setting). - Floating voltage 13,8VDC for Lead sealed battery (factory setting). - Regulation tolerance before output diode and fuse < 2% (at rated conditions). - Peak to peak ripple < 2% (at rated conditions). - Automotive fuse in the minus pole -BAT 3 x 25A/32V (F500, F501, F502). - Cooling: Natural (fanless) - Electric fan controlled in temperature and current for 12V/60A and 24V/30A models. - Sound level < 50dBa at 1m. - Operating temperature (230VAC) From -20°C to +60°C, derating from 60°C. Above 65°C, automatic charger switch off, automatic restart when temperature decreases. - Storage temperature from -20°C to +70°C. - Casing material Casing comprises 3 parts: Aluminium sink frame, thermoplastic body, aluminium clasp. - Dimensions: 289 x 195 x 106 mm / 3,5kg. - IP22, PCB protection: Water-repellent varnish (marine environment). - CE / EMC EN61204-3 - J1171/ISO8846 for model 12V/40A, CE / Security - Others EN60335-2-29, ABYC A-31 - Pending UL and CSA. Against leaking input surges by VDR rupture (voltage dependent resistor) - Not covered by warranty, against output polarity reversal by fuse rupture (removable automotive type), against short-cuircuit and surge, against abnormal overheating by cutting off the charger (internal temperature probe - automatic restart). Temperature probe: - Output voltage compensation : -18mV/°C.