CHARGER YPWR 12V/16A/3 BANKS

- YPower 12V/16A YO12-16ST model - CAN-BUS interface, 3 (including one for the engine battery) : +BAT E, +BAT 1 et +BAT 2 (integrated Mosfet splitter.) Each bank can be used individually and deliver - the rated current - Total rated current (+/-7%) / Rated power 16A/228W. - Charging curve IU or IUoU through internal dip switches (Boost, Absorption and Floating – factory setting) - Selectable automatic Refresh. - Battery type: Lead sealed as factory setting - Other choices through internal setting (Calcium Lead, gel, AGM, LiFePO4, Opened, etc.). - Boost voltage: 14,4VDC for Lead sealed battery (factory setting). - Floating voltage: 13,8VDC for Lead sealed battery (factory setting). - Regulation tolerance before output diode and fuse < 2% (at rated conditions). - Peak to peak ripple < 2% (at rated conditions). - Automotive fuse in the minus pole -BAT 1 x 20A/32V (F500). - Casing comprises 3 parts : Aluminium sink frame, Thermoplastic body, Aluminium clasp. - Dimensions: 236 x 180 x 96 mm / 2,1 kg. - Standards: CE/EMC: EN61204-3 - J1171/ISO8846 for model 12V/40A. CE / Security - Others: EN60335-2-29, ABYC A-31 - Pending UL and CSA . - Protected against leaking input surges by VDR rupture (voltage dependent resistor) - Not covered by warranty, against output polarity reversal by fuse rupture (removable automotive type), against short-cuircuit and surge, against abnormal overheating by cutting off the charger (internal temperature probe - automatic restart). - Options: Output voltage compensation : -18mV/°C